Корзина
Пока пусто
 
Рекомендуем
 

ACI SCANNER

ACI SCANNER
Нажмите, чтобы увеличить
Цена: $50.00
Наличие: В наличии
Модель: ACI SCANNER
Рейтинг: Нет оценок

Количество: Добавить в корзину

ACI SCANNER Introduction 

ACI Auto Communication Interface is 100% compatible with AUTO ENGIUITY OE-LEVEL software, Support all Enhanced Options 

ACI Scan Tool is a professional PC diagnostics scan tool for all OBDII (OBD2) and EOBD IV+ compliant vehicles. ACI Scan Tool allows you to read the vehicles diagnostic trouble codes, live vehicle sensors (including wide-band O2 sensors), actuate bi-directional controls, reset adaptations, and view inspection/maintenance system test results to quickly determine what service the vehicle requires. 

What ACI OBD2 Scan Tool can do for you? 

Professional Diagnostics 

In the professional repair business getting as much coverage as you can is important to effectively and quickly service any vehicle. We offer enhanced coverage options for 43 car brands: Ford/Lincoln/Mercury, GM-family, Chrysler family Toyota/Lexus/Scion, Mazda, Nissan/Infiniti, BMW/MINI, Land Rover, Honda/Acura, Subaru, Mitsubishi, Isuzu, Porsche, Mercedes, Hyundai/Kia, Jaguar, and Audi/VW. 

Not Simple Code Reader 

So you read your vehicles trouble codes, now what? Reading the trouble codes from your vehicle is easy. But without live data and bi-directional controls, you may not have enough information to properly perform the repair. Dont waste your time or money with simple code readers or hand-held scanners. ACI OBD2 scan tool can not only read your codes, but it can also show you live data, actuate components, and run system tests. With complete coverage, you can get the job done right the first time and prevent dreaded "comeback". 

NA Emissions and European MOT 

You may have known that almost all states are using OBD2-based emission testing for all 1996 and newer passenger vehicles? Now with the 2010 legislation, even the 8500 - 10000lb trucks are required to be OBD2 complaint. If you have a Check Engine or Service Engine Soon indicator illuminated, or a specific inspection system monitor test fails, your vehicle will fail its emissions test. With ACI OBD2 scan tool you can inspect your vehicle’s compliance before you wait in line and pay for the test. 

Tuning Your Vehicle 

Read live sensors such as wide-band O2 sensors, fuel adaptation, MAF, ignition timing advance, and lambda readings. If your vehicle supports wide-band O2 sensors, Scan Tool can show you real-time air/fuel mixtures. Finally, data log them all in TXT, CSV, and XML formats with 1ms sampling accuracy. 

Performance Analyzer 

Dont buy into claims of increased horsepower or added torque; you can verify whether that new, expensive part really works. Do your own dynamometer and acceleration testing at your own convenience and without having to rent expensive dynamometer time. 

OE-Level Coverage (Enhanced Interfaces) 

Independent service shops and vehicle tuners require more information than what OBDII can provide to do their job effectively. Since the OBDII standard covers only emissions-related powertrain systems and sensors, there is more information you wont be able to see with a generic OBDII scan tool. With our enhanced interface options, you can get factory tool-like capabilities; allowing you to access hundreds of systems (ABS, airbags, instrument cluster, etc.), sensors, and system/component-level bi-directional controls so you can do your job faster and with a greater degree of accuracy. 

ACI supports non-OBDII and European models. For example, due to their excessive vehicular weight trucks like the Ford Super Duty, Chevy Duramax, and Dodge are not required to be OBDII compliant. But with our enhanced interface options you can now access the diagnostics capabilities of these vehicles. 

For our European customers, our enhanced interface options also support Audi/VW, BMW, Chrysler/Dodge, Ford, Jaguar, Mercedes, and Toyota/Lexus diesel engines and the European-specific models. 

ACI Enhanced Options 

Ford (EI01) 1995-2010 

GM (EI02) 1995-2010 

Toyota/Scion/Lexus (EI03) 1995-2010 

Chrysler/Dodge/Plymouth/Eagle (EI04) 1996-2010 

Mazda (EI05) 1996-2010 

Hyundai and Kia (EI09) 1998-2010 

Nissan and Infiniti (EI06) 2000-2010 

BMW and MINI (EI07) 1996-2010 

Honda and Acura (EI08) 1996-2010 

Land Rover (EI10) 2002-2010 

Jaguar (EI11) 1995-2010 

Subaru (EI12) 1999-2010 

Porsche (EI13) 1997-2010 

Isuzu (EI14) 1996-2010 

Mitsubishi (EI15) 1996-2010 

Audi / VW (EI16) 1996-2010 

Mercedes (EI17) 1998-2010 

Enhanced interface for Ford (EI01) 1995-2010 

Although Ford does implement the largest subset of the OBDII standard, the typical vehicle only supports 20 - 40 sensors and is limited to emissions powertrain. Using the enhanced Ford interface, a typical Ford vehicle will support 200 - 300 sensors within half a dozen systems; thats essential systems such as ABS, airbags, GEM, ICM, etc. Our enhanced Ford interface coverage is only matched by factory tools; we have support for 4,800+ sensors selected from 94 systems. Support includes ISO, SCP, CAN, MCAN, and CAN 14229 controllers. 

The Ford enhanced interface has support for Ford of Europe diesel models such as Ka, Mondo, Galaxy, Fairlane, etc. Finally, our Ford enhanced has support for non-CAN and CAN 400+ bi-directional commands and dozens of system-level tests. With bi-directional controls, you will no longer be relegated to being just an observer in the operation of the vehicle now you can take control of its operation. 


System Tests: 

PATS Timed Key Programming (96 - 08) 

KOEO 

KOER 

Power Balance (CAN-based models) 

EVAP Bay Test 

Service Bleed (Non-CAN support not available with ProLine currently) 

Buzz Injector 

Cylinder Contribution Test 

Switch Test 

Glow Plug Test 

System Self-Test 

Low - and High Speed Fan 

All Outputs On/Off 

Injector Coding (1.8L and 2.0L) 

KAM Reset 

Tire Size Programming up to 40" (99-03 7.3L, and 04-07 6.0L) 

IVD Initialization 

Steering Angle / Yaw Rate / Acceleration Sensor Reset (03 Explorer and Lincoln LS) 

Passenger Seat ReZero 

Power Seat Calibration Test 

Audio Network Communication Test 

Vehicle In-Motion IO Test 

Front Wiper Self-Test 

Rear Wiper Self-Test 

Diesel Particulant Filter Reset, Clear EGR Adaptive Tables, and Clear Fuel Injector 

Adaptive Tables 


Enhanced interface for GM (EI02) 1995-2010 

Our enhanced GM interface supports 6,400+ sensors selected from the engine, transmission, body, and chassis systems. For you tuners out there, our enhanced GM interface gives you access to the Crank Variation Learned test for most vehicles. Also, with our enhanced GM coverage is support for Workhorse 04+ MY vehicles (P42 Series, W22 Series, W24 Series, W52 Series, LF72 Series, P32 Series, W18 Series, FE20 Series, W42 Series). 

Our enhanced GM interface coverage is only matched by factory tools; we have support for 6,000+ sensors selected from all 68 systems. Finally, our enhanced GM has support for 2,000+bi-directional commands and key system-level tests. With bi-directional controls, you will no longer be relegated to being just an observer in the operation of the vehicle now you can take control of its operation. 


Support includes dual-wire and single-wire CAN powertrain support. 

Supports Global-A Vehicles: 

Buick Allure 

Buick LaCrosse 

Cadillac SRX 

Chevrolet Camaro 

Chevrolet Equinox 

GMC Terrain 

System Tests: 

ABS Automated Bleed Routine (ProLine Connector) 

Crank Variation Learn (See: GM-specific vehicle systems for engines support details.) 

Injector Flow Rate Programming (CAN Based Diesels) 

TDC Learn 




Enhanced interface for Toyota/Scion/Lexus (EI03) 1995-2010 

Our enhanced Toyota interface supports engine, transmission, body, and chassis systems. System support includes the bi-directional controls and system tests such as Test Mode (Zero Point Calibration) setting for TCS / VSC systems. Additionally this support includes the Generation 1 and Generation 2 hybrids systems such as HV Battery and HV ECU. For these systems we also do support the Information Data #s reported with trouble codes. 


System Tests: 

Air Bleed--Usual and Master Stroke (ABS) 

ECB Utility--ECB Invalid, Zero Down, and Linear Valve Offset Calibration (ABS) 

Signal Check (Airbag, ABS, ABS CAN, EFI CAN, EHPS, EMPS, and TPWS) 

Reset Memory (EFI, EFI CAN, ABS, ABS CAN) 

Clear Records (EMPS and VGRS) 

Zero Point Init (EMPS) 

Sensitivity Check (OCC) 

Inspection Mode (ABS CAN) 

Test Mode--Zero Calibration (ABS, ABS CAN, TPWS, and OCC) 


Enhanced interface for Chrysler/Dodge/Plymouth/Eagle (EI04) 1996-2010 

Our enhanced Chrysler interface supports hundreds of sensors selected from the powertrain, body, chassis, and transmission system. It includes hi- and low-speed sensor support giving you more sensors and faster throughput then our competitors. This enhanced interface comes with its own hardware interface specifically designed for Chrysler SCI and CCD based controllers. By doing a stand-alone interface we can offer you more SCI coverage then our competitors who are limited by electrical issues with generic OBD-II. Also supported is the CR2 and CR3 Sprinter (04 - 06), Jeep Liberty Diesel (05 - 06), diesel Cummins engines, and the Venom equipped Vipers (08+). 


SBEC/JTEC System Tests: 

EGR System Test 

EVAP System Monitor Service Test 

Erase All DTC Fault Codes 

Generate Full Field Test 

Gov & 3-4 Shift Valve Test - JTEC Only 

Leak Detect Pump Test 

Purge Vapors Test 

Reset All Adaptive Memory Fuel Cells 

Reset All Non-Volatile Memory 

Reset CAM/Crank Misalignment 

Reset CAM, Crank, and Sync Status Record 

Reset Duty Cycle Monitor 

Reset Engine Running Time Record 

Reset Fuel Shut-off Record 

Reset Intake Airflow Control Stepper Motor Position 

Reset Trip Information 

Set Sync Signal - JTEC Only 

Set Minimum Throttle Position to Maximum 

Torque Converter Clutch Test - JTEC Only 

VPW Based System Tests: 

ABS Bleed Brakes (EBC325, Mk20e, and Mk25e) 

Tire Size Programming 

Transmission Rear/Front Wheel Brake Torque Test 

Transmission Pump Test 

Transmission Quick Learn 

Transmission TCC Break-In Test 

Transmission Front Wheel Pinion Factor 

NGC System Tests: 

Injector Kill Test 

NVLD Force Monitor Test 

Purge Vapor Tests 

Reset all On-Board Control Units 

Report Part Number 

Report Reflash Program Counter 

CAN Based System Tests: 

ABS Brake Bleed 

Написать отзыв
Ваше Имя:


Ваш отзыв: Заметка: HTML теги не принимаются! Используйте обычный текст.

Рейтинг: Плохо            Хорошо

Введите код, указанный на картинке:

Нет дополнительных изображений.
Метки: ACI SCANNER,